Voltammetric behavior and determination of bismuth on sodium humate modified carbon paste electrode

The preconcentration and voltammetric behavior of Bi^III on a sodium humate modified carbon paste electrode was studied by means of cyclic voltammetry (CV) and differential pulse stripping voltammetry (DPSV). The proposed measurement involves an initial nonelectrolytic preconcentration step in which Bi^III is complexed by the surface modifier in a solution of 0.05 M KNO₃-0.0106 M HNO₃ (pH 2.0) and a subsequent electrochemical scan step in which the preconcentrated Bi^III was reduced and then oxidized promptly in supporting electrolyte of 0.5 M HNO₃. The resulting DPSV anodic current was proportional to the concentration of Bi^III ion over the range of 4.78 × 10⁻⁸–1.44 × 10⁻⁵ M. The detection limit was 4.78 × 10⁻⁸ M. The proposed method was used to determine bismuth in various samples. Various factors affecting the electrode behavior were also investigated at the same time.     

Ionophores in Rubidium Ion‐Selective Membrane Electrodes

Binaphthyl‐based crown ethers incorporating anthraquinone, benzoquinone, and 1,4‐dimethoxybezene have been synthesized and tested for Rb⁺ selective ionophores in the poly(vinyl chloride) (PVC) membrane. The membrane containing NPOE gave a better Rb⁺ selectivity than those containing either DOA or BPPA as a plasticizer. The response was linear within the concentration range of 1.0×10^?5–1.0×10^?1 M and the slope was 54.7±0.5 mV/dec. The detection limit was determined to be 9.0×10^?6 M and the optimum pH range of the membrane was 6.0–9.0. The ISE membrane exhibits good selectivity for Rb⁺ over ammonium, alkali metal, and alkaline earth metal ions. Selectivity coefficients for the other metal ions, log K^Pot were ?2.5 for Li⁺, ?2.4 for Na⁺, ?2.0 for H⁺, ?1.0 for K⁺, ?1.2 for Cs⁺, ?1.6 for NH₄⁺, ?4.5 for Mg²⁺, ?5.0 for Ca²⁺,?4.9 for Ba²⁺. The lifetime of the membrane was about one month.     

Effect of polarization on the electrode behavior and microstructure of (La,Sr)MnO<Subscript>3</Subscript> electrodes of solid oxide fuel cells

The electrode behavior and microstructure of freshly prepared (La_0.8Sr_0.2)_0.9MnO₃ (LSM) electrodes were investigated under various polarization conditions. The original, large agglomerates in freshly prepared LSM electrodes were broken down into sphere-shaped grains when exposed to cathodic or anodic current passage of 200 mA cm^–2 at 800 °C in air for 3 h. Microstructural changes under cathodic polarization could be related to the pronounced diffusion and migration of oxygen vacancies and Mn ions on the LSM surface and lattice expansion, while lattice shrinkage under oxidation conditions most likely contributes to the structural changes under anodic polarization. Such morphological changes were irreversible and were found to be beneficial to the performance of freshly prepared LSM electrodes. Freshly prepared LSM electrodes behaved very differently with respect to the cathodic and anodic current passage treatment.     

Charge storage mechanism of copper hexacyanoferrate nanocubes for supercapacitors

The widely accepted theory concerning the electrochemical energy storage mechanism of copper hexacyanoferrate (CuHCF) for supercapacitors is that CuHCF stores charge by the reversible redox processes of Fe³⁺/Fe²⁺ couple and Cu cations are electrochemically inactive. In this work, CuHCF nanocubes (CuHCF-NC) were synthesized in the presence of potassium citrate and its electrochemical properties were tentatively studied in 1 mol/L Na₂SO₄ aqueous electrolyte. Good supercapacitive performance was exhibited. The combined analyses of cyclic voltammogram (CV) and X-ray photoelectron spectroscopy (XPS) disclosed that the CuHCF nanocubes underwent the redox reactions of Fe³⁺/Fe²⁺ and Cu²⁺/Cu⁺ couples to store charges. The Cu²⁺/Cu⁺ redox couple was activated due to the strong coordination interaction between the carboxylate groups of citrate ions and surface Cu cations.     

Kinetic parameters of the In(III)/In(I) electrode reaction in bromide medium

The electrode kinetic parameters of the In(III)/In(I) couple in acidic 4M bromide solution have been determined by means of the rotating disc electrode technique.

---

Die elektrochemisch-kinetischen Parameter des In(III)/In(I)-Redoxsystems in Bromidlösung (Kurze Mitteilung)

Zusammenfassung Die elektrochemisch-kinetischen Parameter am In(III)/In(I)-Redoxsystem wurden in saurer 4-M-Bromidlösung mittels der rotierenden Scheibenelektrode bestimmt.

     

Uniform hierarchical silica film with perpendicular macroporous channels and accessible ordered mesopores for biomolecule separation

Herein, we demonstrate that silica films with perpendicular macroporous channels and accessible ordered mesopores can be conveniently prepared. The hierarchical macroporous–mesoporous silica films are synthesized by using zinc oxide nanorod array as macroporous template and CTAB surfactant as mesoporous template. In basic surfactant-containing solution, ordered mesoporous silica shells homogeneously grow on the zinc oxide nanorod array. The growth of the mesostructures do not require any chemical modification for the zinc oxide nanorod, which opens a new way for preparing hierarchical silica films with perpendicular mesochannels. The prepared hierarchical macroporous–mesoporous silica films possess a uniform thickness of 2 mm, large perpendicular macropores with a length of 1.8 mm and a width of 80 nm, and accessible ordered mesopores. Separation experiment demonstrates that this macroporous–mesoporous film can effectively separate biomolecules with different sizes.     

Synthesis of metal/polymer nanocomposite by UV-radiation curing

Nanocomposite polymers containing bismuth nanoparticles (2 wt%) have been obtained by photopolymerization of acrylic resins. The bismuth nanoparticles have been synthesized by reduction of BiCl₃ with t-BuONa activated sodium hydride. In situ t-BuONa stabilization protects the metallic particles against aggregation. Transmission electron microscopy (TEM) analysis has shown that the bismuth nanoparticles are well dispersed in the acrylic resin. The curing process was followed quantitatively by infrared spectroscopy through the decrease upon UV exposure of the IR bands characteristic of the functional groups. The bismuth nanoparticles were found to have no detrimental effect on the photopolymerization kinetics. Dynamic mechanical analysis (DMA) has shown that the viscoelastic properties of the nanocomposite photopolymer are significantly modified in comparison with corresponding UV-cured polymer. The addition of metal nanoparticles was found to greatly reduce the gloss of UV-cured coatings.     

Heat capacity, enthalpy and entropy of bismuth niobate and bismuth tantalate

The heat capacity and the heat content of bismuth niobate BiNbO₄ and bismuth tantalate BiTaO₄ were measured by the relaxation method and Calvet-type heat flux calorimetry. The temperature dependencies of the heat capacities in the form C_pm=128.628+0.03340 T−1991055/T²+136273131/T³ (J K^-1 mol^-1) and 133.594+0.02539 T−2734386/T²+235597393/T³ (J K^-1 mol^-1) were derived for BiNbO₄ and BiTaO₄, respectively, by the least-squares method from the experimental data. Furthermore, the standard molar entropies at 298.15 K S_m(BiNbO₄)=147.86 J K^-1 mol^-1 and S_m(BiTaO₄)=149.11 J K^-1 mol^-1 were assessed from the low temperature heat capacity measurements. To complete a set of thermodynamic data of these mixed oxides an attempt was made to estimate the values of the heat of formation from the constituent binary oxides.     

Synthese und Kristallstruktur von [(Me3Si)2BiCu(PMe3)3], dem ersten Komplex mit einer Bismut—Kupfer‐Bindung

Synthesis and Crystal Structure of [(Me₃Si)₂BiCu(PMe₃)₃] — the First Complex with a Bismuth—Copper Bond The reaction of CuO^t Bu with PMe₃ and Bi(SiMe₃)₃ in hexane yields the phosphine‐stabilized complex [(Me₃Si)₂Bi‐Cu( PMe₃)₃]. This synthesis gave rise to the first binuclear Bi—Cu compound to be structurally characterized by X‐ray crystallography.     

有机硅改性丙烯酸酯共聚乳液合成方法及胶膜性能的研究

用一次投料法、单体乳液滴加法和引发剂滴加法有机硅改性丙烯酸酯共聚乳液，聚合过程、胶粒形态及乳液稳定性的观测结果表明：单体乳液滴加法是合成该类乳液的最佳方法，研究了单体乳液滴加法中有机硅含量与聚合反及胶膜性能的关系，结果表明：有机硅含量在１５％以下时，聚合反应可以顺利进行，胶膜性能不仅依赖于聚合时有机硅单体的总量，而且还依赖于有机硅单体中活性硅氧烷所占的比例。